What Are The Adverse Effects Of Improper Installation Of Non-clogging Sewage Pumps?

It is mainly composed of pump body, impeller, back cover, mechanical seal, pump shaft, bearing seat, inlet valve, gas-liquid separation pipe, water adding valve, inlet and outlet pipes, etc. It is a pump product that is connected with the motor and works underwater at the same time. It has the characteristics of being able to transport liquids containing hard solids, fibers, and particularly dirty, sticky and slippery liquids. The double-blade impeller structure greatly improves the passing capacity of dirt.
The correct installation of CIP Return Pump is an important factor related to whether it can operate normally in future use. The installation of the non-clogging sewage pump has a great relationship with future use.
If the upper end of the non-clogging sewage pump is not installed well, that is, the vertical angle of the non-clogging sewage pump is not good when it is installed, it will cause the shaft of the non-clogging sewage pump to bend.
If the upper end of the non-clogging sewage pump is tilted, the graphite polytetrafluoroethylene bearing will first be worn out at the diagonal position, and then the stainless steel sleeve and graphite polytetrafluoroethylene bearing of the non-clogging sewage pump will be in an abnormal working state. As the wear of the non-clogging sewage pump bearing increases, the gap between the sleeve and the bearing will become larger and larger, causing the lower end of the "cantilever" non-clogging sewage pump shaft to deflect. This is because the center of gravity of the impeller has coincided with the rotation center of the pump shaft. Because no matter how well the static balance is adjusted in the original design, a large unbalanced inertia force will be generated. The speed of a general pump is generally 2900rmin, so the wear of the bearing causes the generation of unbalanced inertia force, and the increase in unbalanced inertia force aggravates the wear of the bearing. This vicious cycle will become more and more serious.
When the unbalanced force of the non-clogging sewage pump increases to a certain value, the non-clogging sewage pump shaft placed on the "cantilever" of the non-clogging sewage pump will bend. Therefore, when installing the non-clogging sewage pump, pay attention to the difference in shaft verticality. In the original structure, the shaft of the non-clogging sewage pump is wrapped by the branch pipe, and it is difficult to measure its verticality.
The non-clogging sewage pump is suitable for conveying industrial wastewater and urban domestic sewage. Its biggest advantage is that it has strong self-priming ability. The suction pipeline does not need to be equipped with a bottom valve. It can convey sewage containing solid particles and fiber materials. In addition to conveying sewage, it is also suitable for use as a drain pump, pulp pump, filter flushing condensation circulation pump, irrigation pump, etc. It is widely used in mines, construction sites, hospitals, hotels, sewage treatment and other occasions. It is suitable for medium temperature 0-250 degrees.