Sanitary Pumps Cp Series For Trucks

The Sanitary Negative Pressure Pump is designed to handle liquids with viscosities up to 500 cP. It will work with liquids to create positive or negative suction on the pump at flow rates up to 200 m/h and pressure heads of 3 bar.

The CP unit has been manufactured and tested to EHEDG standards.

Depending on the product to be pumped, the pumps can be equipped with:

Closed, open and star-shaped impellers

Various mechanical seal types and materials

Various O-ring materials

Low surface roughness

Drain connection

Heating jacket

Parameters:

Capacity < 200 m3/h

Pressure < 30 mlc

Impeller Open, closed, star-shaped

Material Wetted parts: 1.4404

Connections 1,5" / DN40 to 6" / DN150

Connections

Coupling: DIN11851, DIN11864-1, SMS1145

Flanges: EN1092-1, DIN11864-2, ANSI

Tri-clamp: ISO2852, DIN32676, DIN11864-3

Shaft seal Single, double hardened, inside and outside, in accordance with DIN24960

Seal material carbonl/CrM, carbon/SiC, SiC/SiC, Tc/Tc

Elastomers EPDM, Viton, NBR, Teflon, KALREZ, for example

According to FDA

Surface roughness Standard > 0,8 micron

Motor options Hydraulic or electric motor