Installation of sanitary centrifugal pump

The installation foundation of sanitary pumps should generally be flat and well grounded. Install it at the lowest point of the equipment as much as possible, that is, the maximum lifting height. 

The pipe diameter of the sanitary centrifugal pump must be the same as the inlet and outlet diameters of the pump, and the diameter of the inlet pipe cannot be too small. (If the diameter of the pipe is smaller than the diameter of the pump, please use an eccentric diameter reducer to adjust to minimize the diameter of the pipe so as not to form dents.) The outlet diameter is too large and try not to be too large. If the outlet diameter is larger than the pump outlet, try to increase the distance from the pump outlet to avoid overloading the pump motor.